| ABORTED | 1.8 | | | actions or activities that were attempted, but terminated before they could be completed. |
| ABSOLUTE | 1.4 | | | relating to or derived in the simplest manner from the fundamental units or measurements. |
| ACTION | 1.4 | | | indication of the operating state of a mechanism. |
| ACTIVE | 1.5 | | | relating to logic or motion program currently executing. |
| ACTIVITY | 2.0 | | | phase or segment of a recipe or program. |
| ACTUAL | 1.0 | | | measured or reported value of an observationobserved value of a property at a point in time.. |
| ALL | 1.0 | | | all actions, items, or activities being counted independent of the outcome. |
ALTERNATING | 1.2 | 1.6 | | measurement of alternating voltage or current. If not specified further in statistic, defaults to RMS voltage. DEPRECATED in Version 1.6. |
| AUXILIARY | 1.3 | | | when multiple locations on a piece of bar stock being feed by a bar feeder are referenced as the indication of whether the end of that piece of bar stock has been reached. |
| A_SCALE | 1.2 | | | A-Scale weighting factor on the frequency scale. |
| BAD | 1.0 | | | actions, items, or activities being counted that do not conform to specification or expectation. |
| BATCH | 1.7 | | | group of parts produced in a batch. |
| BINARY | 2.2 | | | observed as a binary data type. |
| BOOLEAN | 2.2 | | | observed as a boolean data type. |
| BRINELL | 1.4 | | | scale to measure the resistance to deformation of a surface. |
| B_SCALE | 1.2 | | | B-Scale weighting factor on the frequency scale. |
| COMMANDED | 1.0 | | | directive value including adjustments such as an offset or overrides. |
| COMPLETE | 1.5 | | | associated with the completion of an activity or event. |
| CONSUMED | 1.5 | | | amount of material consumed from an object or container during a manufacturing process. |
| CONTROL | 1.1 | | | state of the enabling signal or control logic that enables or disables the function or operation of the entity. |
| C_SCALE | 1.2 | | | C-Scale weighting factor on the frequency scale. |
| DELAY | 1.4 | | | elapsed time of a temporary halt of action. |
| DETECT | 2.2 | | | indicated by the presence or existence of something. |
DIRECT | 1.2 | 1.6 | | DC current or voltage. DEPRECATED in Version 1.6. |
| DRY_RUN | 1.4 | | | setting or operator selection used to execute a test mode to confirm the execution of machine functions. |
| D_SCALE | 1.2 | | | D-Scale weighting factor on the frequency scale. |
| ENDED | 1.8 | | | boundary when an activity or an event terminates. |
| ENUMERATED | 2.2 | | | observed as a set containing a restricted number of discrete values where each discrete value is named and unique. ISO 21961:2003, 013 |
| EXPIRATION | 1.5 | | | relating to the expiration or end of useful life for a material or other physical item. |
| FAILED | 1.8 | | | actions or activities that were attempted , but failed to complete or resulted in an unexpected or unacceptable outcome. |
| FIRST_USE | 1.5 | | | relating to the first use of a material or other physical item. |
| GATEWAY | 1.6 | | | Gateway for the Component network. |
| GOOD | 1.0 | | | actions, items, or activities being counted that conform to specification or expectation. |
| HEAT_TREAT | 1.7 | | | material heat number. |
| INCREMENTAL | 1.4 | | | relating to or derived from the last observationobserved value of a property at a point in time.. |
| INSTALL_DATE | 1.6 | | | date the hardware or software was installed. |
| IPV4_ADDRESS | 1.6 | | | IPV4 network address of the Component. |
| IPV6_ADDRESS | 1.6 | | | IPV6 network address of the Component. |
| ISO_STEP_EXECUTABLE | 1.7 | | | reference to a ISO 10303 Executable. |
| JOG | 1.3 | | | relating to momentary activation of a function or a movement. DEPRECATION WARNING: May be deprecated in the future. |
| LATERAL | 1.4 | | | indication of the position of a mechanism that may move in a lateral direction. |
| LEEB | 1.4 | | | scale to measure the elasticity of a surface. |
| LENGTH | 1.4 | | | reference to a length type tool offset variable. |
| LICENSE | 1.6 | | | license code to validate or activate the hardware or software. |
| LINE | 1.1 | | | state of the power source. |
| LINEAR | 1.2 | | | direction of motion of a linear motion. |
| LOADED | 1.4 | | | indication that the subparts of a piece of equipment are under load. |
| LOT | 1.7 | | | group of parts tracked as a lot. |
| MACHINE_AXIS_LOCK | 1.4 | | | setting or operator selection that changes the behavior of the controller on a piece of equipment. |
| MAC_ADDRESS | 1.6 | | | Media Access Control Address. The unique physical address of the network hardware. |
| MAIN | 1.5 | | | relating to the primary logic or motion program currently being executed. |
| MAINTENANCE | 1.4 | | | relating to maintenance on the piece of equipment. |
| MANUAL_UNCLAMP | 1.3 | | | indication of the state of an operator controlled interlock that can inhibit the ability to initiate an unclamp action of an electronically controlled chuck. |
| MANUFACTURE | 1.5 | | | related to the production of a material or other physical item. |
| MANUFACTURER | 1.6 | | | corporate identity for the maker of the hardware or software. |
| MAXIMUM | 1.1 | | | maximum value. |
| MINIMUM | 1.1 | | | minimum value. |
| MOHS | 1.4 | | | scale to measure the resistance to scratching of a surface. |
| MOTION | 1.4 | | | indication of the open or closed state of a mechanism. |
| NO_SCALE | 1.2 | | | no weighting factor on the frequency scale. |
| OPERATING | 1.4 | | | piece of equipment that is powered or performing any activity. |
| OPERATION | 2.0 | | | step of a discrete manufacturing process. |
| OPERATOR | 1.4 | | | relating to the person currently responsible for operating the piece of equipment. |
| OPTIONAL_STOP | 1.4 | | | setting or operator selection that changes the behavior of the controller on a piece of equipment. |
| ORDER_NUMBER | 1.7 | | | authorization of a process occurrence. |
| OVERRIDE | 1.0 | | | overridden value. |
| PART | 1.8 | | | amount included in the partdiscrete item that has both defined and measurable physical characteristics including mass, material, and features, and is created by applying one or more manufacturing process steps to a workpiece. |
| PART_FAMILY | 1.7 | | | group of parts having similarities in geometry, manufacturing process, and/or functions. |
| PART_NAME | 1.7 | | | word or set of words by which a part is known, addressed, or referred to. |
| PART_NUMBER | 1.7 | | | particular part design or model. |
| POWERED | 1.4 | | | piece of equipment is powered and functioning or Component that are required to remain on are powered. |
| PRIMARY | 1.3 | | | main or most important location of a piece of bar stock. |
| PROBE | 1.1 | | | position provided by a measurement probe. DEPRECATION WARNING: May be deprecated in the future. |
| PROCESS | 1.4 | | | relating to production of a part or product on a piece of equipment. |
| PROCESS_NAME | 1.7 | | | word or set of words by which a process being executed (process occurrence) by the device is known, addressed, or referred to. |
| PROCESS_PLAN | 1.7 | | | process plan that a process occurrence belongs to. |
| PROCESS_STEP | 1.7 | | | step in the process plan that this occurrence corresponds to. |
| PROGRAMMED | 1.3 | | | directive value without offsets and adjustments. |
| RADIAL | 1.4 | | | reference to a radial type tool offset variable. |
| RAPID | 1.3 | | | performing an operation faster or in less time than nominal rate. |
| RAW_MATERIAL | 1.7 | | | material that is used to produce parts. |
| RECIPE | 2.0 | | | process as part of product production; can be a subprocess of a larger process. |
| RELEASE_DATE | 1.6 | | | date the hardware or software was released for general use. |
| REMAINING | 1.3 | | | remaining measure or count of an action, object or activity. |
| REQUEST | 1.3 | | | requestcommunications method where a client transmits a message to an agent. That message instructs the agent to respond with specific information. by an Interface for a task. |
| RESPONSE | 1.3 | | | responseresponse interface which responds to a request. by an Interface to a requestcommunications method where a client transmits a message to an agent. That message instructs the agent to respond with specific information. for a task. |
| ROCKWELL | 1.4 | | | scale to measure the resistance to deformation of a surface. |
| ROTARY | 1.2 | | | direction of a rotary motion using the right hand rule convention. |
| SCHEDULE | 1.5 | | | identity of a control program that is used to specify the order of execution of other programs. |
| SEGMENT | 2.0 | | | phase of a recipe process. |
| SERIAL_NUMBER | 1.7 | | | serial number that uniquely identifies a specific part. |
| SET_UP | 1.4 | | | relating to the preparation of a piece of equipment for production or restoring the piece of equipment to a neutral state after production. |
| SHORE | 1.4 | | | scale to measure the resistance to deformation of a surface. |
| SINGLE_BLOCK | 1.4 | | | setting or operator selection that changes the behavior of the controller on a piece of equipment. |
| STANDARD | 1.3 | | | standard measure of an object or an action. |
| START | 1.5 | | | boundary when an activity or an event commences. |
| SUBNET_MASK | 1.6 | | | SubNet mask for the Component network. |
| SWITCHED | 1.4 | | | indication of the activation state of a mechanism represented by a Composition. |
| TARGET | 1.1 | | | goal of the operation or process. |
| TARGET_COMPLETION | 1.5 | | | relating to the end or completion of an activity or event. |
| TOOL_CHANGE_STOP | 1.4 | | | setting or operator selection that changes the behavior of the controller on a piece of equipment. |
| USEABLE | 1.3 | | | remaining usable measure of an object or action. |
| UUID | 1.7 | | | universally unique identifier as specified in ISO 11578 or RFC 4122. |
| VERSION | 1.6 | | | version of the hardware or software. |
| VERTICAL | 1.4 | | | indication of the position of a mechanism that may move in a vertical direction. |
| VICKERS | 1.4 | | | scale to measure the resistance to deformation of a surface. |
| VLAN_ID | 1.6 | | | layer2 Virtual Local Network (VLAN) ID for the Component network. |
| WASTE | 1.8 | | | amount discarded. |
| WIRELESS | 1.6 | | | identifies whether the connection type is wireless. |
| WORKING | 1.4 | | | piece of equipment performing any activity, the equipment is active and performing a function under load or not. |