ToolingMeasurement
Supertype: Measurement
Definition: constrained scalar value associated with a cutting tool.
Version Info
| Introduced | Deprecated | Updated |
|---|---|---|
| 1.2 | 2.5 (Previous: 2.4) |
Documentation
Description
A Measurement is specific to the tool management policy at a particular shop. The tool zero reference point or gauge line will be different depending on the particular implementation and will be assumed to be consistent within the shop. MTConnect Standard does not standardize the manufacturing process or the definition of the zero point.
Inherited Properties
| Name | Type | Int | Dep | Multiplicity | Description |
|---|---|---|---|---|---|
maximum | float | 1.2 | 0..1 | maximum value for the measurement. | |
minimum | float | 1.2 | 0..1 | minimum value for the measurement. | |
nativeUnits | NativeUnitEnum | 1.2 | 0..1 | units the measurement was originally recorded in. See Device Information Model for the complete list of DataItem::nativeUnits. | |
nominal | float | 1.2 | 0..1 | as advertised value for the measurement. | |
significantDigits | integer | 1.2 | 0..1 | number of significant digits in the reported value. | |
units | UnitEnum | 1.2 | 0..1 | units for the measurements. See Device Information Model for the complete list of DataItem::units. | |
value | float | 1.2 | 0..1 |
Inherited Relations
| Name | Type | Int | Dep | Multiplicity | Description |
|---|---|---|---|---|---|
isMeasurementOf | PhysicalAsset | 2.5 | 0..* |
Properties
| Name | Type | Int | Dep | Multiplicity | Description |
|---|---|---|---|---|---|
code | CodeEnum | 1.2 | 0..1 | shop specific code for the measurement. ISO 13399 codes MAY be used for these codes as well. See |
Relations
| Name | Type | Int | Dep | Multiplicity | Description |
|---|---|---|---|---|---|
isMeasurementOf | CuttingItem | 1.2 | 0..* | A collection of measurements relating to this cutting item. | |
isMeasurementOf | CuttingToolLifeCycle | 1.2 | 0..* |
Subclasses
| Name | Int | Dep |
|---|---|---|
BodyDiameterMax | 1.2 | |
BodyLengthMax | 1.2 | |
ChamferFlatLength | 1.2 | |
ChamferWidth | 1.2 | |
CornerRadius | 1.2 | |
CuttingDiameter | 1.2 | |
CuttingDiameterMax | 1.2 | |
CuttingEdgeLength | 1.2 | |
CuttingHeight | 1.2 | |
CuttingReferencePoint | 1.2 | |
DepthOfCutMax | 1.2 | |
DriveAngle | 1.2 | |
FlangeDiameter | 1.2 | |
FlangeDiameterMax | 1.2 | |
FunctionalLength | 1.2 | |
FunctionalLength | 1.2 | |
FunctionalWidth | 1.2 | |
IncribedCircleDiameter | 1.2 | |
InsertWidth | 1.2 | |
OverallToolLength | 1.2 | |
PointAngle | 1.2 | |
ProtrudingLength | 1.2 | |
ShankDiameter | 1.2 | |
ShankHeight | 1.2 | |
ShankLength | 1.2 | |
StepDiameterLength | 1.2 | |
StepIncludedAngle | 1.2 | |
ToolCuttingEdgeAngle | 1.2 | |
ToolLeadAngle | 1.2 | |
ToolOrientation | 1.2 | |
UsableLengthMax | 1.2 | |
Weight | 1.2 | |
Weight | 1.2 | |
WiperEdgeLength | 1.2 |